Center Gear, Gear Ring
Can be raised and lowered automatically using an electric button
Power
Input: 3-phase 380V 50Hz
Current Capacity: 50A
Air Supply
0.5 ~ 0.6 MPa, 90 NL/min
Main Components
Bearings: NSK and other Japanese brands
Motor and Gearbox: TECO (Taiwan) + In-house high-precision worm gear reducer
Pneumatic Components: SMC + CKD
Programmable Logic Controller (PLC): Mitsubishi Electric
Frequency Inverter: Mitsubishi Electric
Human-Machine Interface (HMI): Mitsubishi Electric
Castings: Gray Cast Iron HT300
Gears: Forged gear steel, high-frequency surface hardening after gear cutting, followed by gear grinding
Base: Integral cast base
Electrical Cabinet: Separate electrical cabinet
Processing Pressure
Minimum operating pressure: 12 kg (120 N)
Standard maximum operating pressure: 350 kg (3500 N) (can be extended based on application requirements)
Pressure control method: Precision load cell + PLC + electronically controlled proportional valve to achieve closed-loop pressure feedback control, enabling real-time pressure monitoring and calibration to ensure pressure accuracy and stability.
Rotational Speed
Lower Anvil: 1–50 RPM; Upper Anvil: 1–15 RPM
Center Gear: 1–25 RPM; Ring Gear: 1–25 RPM
Operating Environment
15–35°C
Humidity: Below 85% (no condensation)
Air Quality: Free of corrosive, flammable, or harmful gases; free of pollutants, dust, etc.
Machine dimensions: Length 1995 mm * Width 1435 mm * Height 2680 mm (2230 mm with cylinders removed)
Machine weight: 5000 kg
| Model | 12B-8L/P | 13B-5L/P 13B-6L/P | 13B-6L/P | 13.9B-9L/P | |
| Final dimensions | Grinding(mm) | Φ1048×Φ542×t50 | Φ849×Φ273×t40 | Φ924×Φ360×t50 | Φ926×Φ522×t45 |
| Polishing(mm) | Φ1058×Φ522×t50 | Φ858×Φ264×t40 | Φ933×Φ350×t50 | Φ933×Φ515×t40 | |
| Planetary gear parameters | Modulus | M3 | DP12 | DP12 | DP12/M2 |
| Number or teeth | Z95 | Z147 | Z147 | Z108/Z114 | |
| Pitch circle(mm) | 285 | 311.15 | 311.15 | 228.6 | |
| Drive method | 3 motors | ● | ● | ● | ● |
| 4 motors | ● | ● | ● | ● | |
| Number of planetary gears | 8 | 5 | 6 | 9 | |
| Maximum machining diameter(mm) | 210 | 210 | 210 | 150 | |
| Maximum processing thickness(mm) | 66 | 66 | 66 | 66 | |
| Note: This device can be easily expanded to a 14B or 15B device, greatly increasing its versatility. | |||||
Ready to Advance
Your Manufacturing Capability?
Contact our sales and engineering team today to discuss your requirements and schedule a virtual machine demonstration.
