20B/22B/24B

Can be raised and lowered automatically using an electric button

Input: 3-phase 380V 50Hz

Current Capacity: 100A

0.5 ~ 0.6 MPa, 90 NL/min

Bearings: THK cross-roller bearings + NSK and other Japanese brands

Motor and Gearbox: TECO (Taiwan) + in-house high-precision worm gear reducer

Pneumatic Components: SMC + CKD

Programmable Logic Controller (PLC): Mitsubishi Electric

Frequency Inverter: Mitsubishi Electric

Human-Machine Interface (HMI): Mitsubishi Electric

Castings: Gray Cast Iron HT300

Gears: Forged gear steel, high-frequency surface hardening after gear cutting, followed by gear grinding

Base: Integral cast base

Electrical Cabinet: Separate electrical cabinet

Minimum operating pressure: 15 kg (150 N)

Standard maximum operating pressure: 800 kg (8000 N) (expandable based on application requirements)

Pressure control method: Precision load cell + PLC + electronically controlled proportional valve to achieve closed-loop pressure feedback control, enabling real-time pressure monitoring and calibration to ensure precision and stability.

Lower Anvil: 1–60 RPM; Upper Anvil: 1–20 RPM

Center Gear: 1–30 RPM; Ring Gear: 1–30 RPM

Temperature: 15–35°C

Humidity: Below 85% (to prevent condensation);

Air Quality: Free of corrosive, flammable, or harmful gases; free of pollutants, dust, etc.